Product Range | walls
- - “Fair faced” to both sides
- - No Foundation Required
- - Quick and Easy to Install
- - Tongue and Grooved Joint
- - Made to Measure Lengths
- - Durable
- - Cost effective Solution
We can also provide a full and comprehensive design, manufacture and install service as well as offer technical advice from our highly experienced staff. We can also offer help and advice should you wish to install with your own contractor.
Our company manufactures all our products in accordance with the relevant British Standard.
The Wall Panels we manufacture are durable, quick and easy to install, provide a smooth finish in both surfaces and are movable, should you need to re-locate your building.
Treanor Pujol Wall Panels are are suitable for a number of uses including:
- - Grain Storage
- - Cattle Housing
- - Retaining Walls
- - Bunker Walls
- - Warehouses
- - Firewalls
- - Tanks
- - Security Walls
All the precast concrete wall panels are designed to the requirements of BS 8110 1997. High tensile steel wire is used for the prestressing tendons, in various configurations to suit particular spans.
Treanor Pujol will provide layout drawings your building showing the structural support for the wall panels.
Precast wall panels can be used with steel, insitu and precast forms of construction.
The wall panels are manufactured to 100mm, 150mm and 200mm depths and the standard nominal width for all units is 1200mm.
See Load and Span - Wall Panels for more details.
Precast wall panels are factory produced and therefore manufactured in a controlled environment resulting in the following benefits:
- - Two smooth faces finish achieved by manufacturing on high quality steel beds
- - Quality control systems applied to the manufacturing process
- - Manufactured in accordance with relevant British standards
- - Strict Health and Safety policy applied
All materials used in the manufacturing process conform to the requirements of the relevant British Standard for that material. The wall panels are sawn to the required length on the manufacturing bed. The wall panels come with two smooth faces and are supplied to site with plain sawn open ends as standard.
Installation of wall panels is quick and straight forward. The units are hoisted into position using a crane or telehandler and attached to the supporting structure.
Technical details for walls
If you're looking for more detailed information (loads & spans, diagrams, ...) visit the walls technical details section.